Shijiazhuang Haosen Business Service Co.,Ltd.

Company News

Home >> Company News >>Why use diagonal wire pre-cut system in vertical 3D panel machine?

Why use diagonal wire pre-cut system in vertical 3D panel machine?

2017-01-03

Why use diagonal wire pre-cut system in vertical 3D panel machine?

1.Diagonal wire cut in advance, it can avoid the disadvantage of cutting it while welding in the machine, give the diagonal wire bigger strength to insert the EPS panel.

EPS 3D panel machine


2 .While the diagonal wire diameter exceeds 3mm,it will be some difficulty for the cutting after welding, that will lead bigger failure welding rate for the diagonal wire.

3.Vertical 3D panel machine use pre-cut diagonal wire before inserting, it reduces the workshop space, saves the workshop building cost. The coil wire of diagonal wire will occupy more space of the workshop.

4.It is better for the diagonal wire to be closer to the crossing welding point of the welded mesh,achieve nodes welding,which increases the mechnical property of the 3D panels.

5.We are the only one that have patent for diagonal wire pre-cutting system! And our vertical 3D panel machines has more and more repeat orders!

More advantage about vertical 3D wire mesh panel machines, welcome to browse our web http://www.hbhscn.com/3d-panel-production-line_p39.html

PreviousMulfunction and Solution of the Spot Welding Machine

NextIntroduction of C Purlin Steel Roll Forming Machine

HOT PRODUCTS

站长统计