Structure Characteristics of Welded Mesh Machine

As the welded wire mesh is widely used not only in industry but also in our life, the demand of welded mesh machine is increasing day by day. Today I'd like to introduce about the structure of welded mesh machine.

1. Welded mesh machine adopts gantry type structure. It's effective working space is 900mm, and the maximum mesh width that suitable for welding is 700mm.

2. According to the user's requirements, the upper beam of welding machine be equipped with 3 or 4 welding cylinders.

3. The welding parameters(welding current, welding time, pre-pressing time and maintenance time etc.) of each group can be set separately.

4. The secondary adopts tree-phase full-wave rectifier mode power supply. It is of high power factor, strong current output and energy saving.

5. Welding machine adopts full digital Programmable Logic Controller(PLC) to control, so its current output is stable, operation is reliable and failure rate is very low.

6. Transformer, primary SCR and secondary rectifier bridge, welding eletrode these three operation system respectively set strong cooling system for cooling, to ensure the welding machine can work stably for a long time.

7. As for welding cylinder and welding wave, we select quality fast device to ensure that welding machine can work continuously and stably.

After reading, Have you got a deeply understanding about welded mesh machine? If you have still be puzzled or you have requirements of welded mesh machine, please write to us by sales1@hbhscn.com. We are looking forward to hearing from you!